Turning off the blue power LED in software?

A shrunk down Leonardo-compatible board, thumb drive sized with native USB support. [Product info]
Post Reply
alfiedotwtf
Posts: 2
Joined: Fri May 06, 2016 6:22 am

Turning off the blue power LED in software?

Post by alfiedotwtf » Fri May 06, 2016 6:24 am

Is there anyway I can turn off the blue power LED in software?

Thanks!

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: Turning off the blue power LED in software?

Post by angusgr » Mon May 09, 2016 4:25 am

Hi Alfie,

Unfortunately you can't disable it from software. The easiest option is to place some black tape over the entire LED, if you don't mind losing the TX/RX light as well.

Angus

alfiedotwtf
Posts: 2
Joined: Fri May 06, 2016 6:22 am

Re: Turning off the blue power LED in software?

Post by alfiedotwtf » Mon May 09, 2016 6:17 am

angusgr wrote: Unfortunately you can't disable it from software. The easiest option is to place some black tape over the entire LED, if you don't mind losing the TX/RX light as well.
Ah nuts. Thanks, black tape it is :)

Alfie

Post Reply