16x32 P10 1R1G Dual Color LED Module

The Dot Matrix Display (DMD) is a 32x16 array of high-brightness LEDs for visually striking effects. [Product Page]
Post Reply
Naga Suresh Thota
Posts: 1
Joined: Mon Oct 13, 2014 3:48 pm

16x32 P10 1R1G Dual Color LED Module

Post by Naga Suresh Thota » Mon Oct 13, 2014 6:57 pm

Hi ,
I am new to DMD panels,I am using 16x32 P10 1R1G Dual Color Outdoor LED Module to print some ASCII values...
while i am programming whole panel to blink Red Leds pattern displaying fine
If i am using whole panel Green Led to blink Its also working fine....

But
if i programming separate the panel as 2 lines to scroll,for example first(8 x16) line is to blink Red characters, second line(8x16) is to blink Green characters ,
In between these 2 line there is some lights blinking and disturbing my pattern (might be red or green not included in program)...

What might be the problem??? Problem with Hardware or Software. In my Code tested many ways but no use...

If you have any 16x32 P10 1R1G Dual Color LED Module datasheet or relevant data please post for me...

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: 16x32 P10 1R1G Dual Color LED Module

Post by angusgr » Mon Oct 13, 2014 8:52 pm

Hi Naga,

Sorry, we only support our Freetronics DMD displays. Perhaps you can ask the vendor where you purchased these from?


Angus

ibn.fadli
Posts: 1
Joined: Mon Jun 27, 2016 12:40 am

Re: 16x32 P10 1R1G Dual Color LED Module

Post by ibn.fadli » Mon Jun 27, 2016 12:46 am

angusgr wrote:Hi Naga,

Sorry, we only support our Freetronics DMD displays. Perhaps you can ask the vendor where you purchased these from?


Angus
ehm.. hello. i'm now using your DMD library. thanks before..
but , can you explain how we can know which P10 panel made by freetronics? because i've the same problem when i'm bought P10 1r1g panel and i used dmd library, and it was not working well..

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: 16x32 P10 1R1G Dual Color LED Module

Post by angusgr » Mon Jun 27, 2016 10:11 pm

Hi,

Freetronics DMDs are not marketed as "P10". They come in Freetronics packaging with a "DMDCon" connector in the box.

You can view our range of DMD displays here: http://www.freetronics.com.au/collections/display/dmd

Angus

Post Reply