Power supplies

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
Stylmast
Posts: 36
Joined: Sat Sep 06, 2014 8:19 am

Re: Power supplies

Post by Stylmast » Wed Feb 18, 2015 11:57 pm

It was the last one I bought through Jaycar. I'm glad i didn't get a change to run it yet as it would have added to my problems.

Still looking for a switch at the moment, rack mount with at least 12 POE outlets or more.

Thanks for your help so far Angus.

Regards

Scott
Top
Stylmast
Posts: 36
Joined: Sat Sep 06, 2014 8:19 am

Re: Power supplies

Post by Stylmast » Mon Aug 31, 2015 7:09 am

Hi Angus,

When do expect to have the Isolated POE boards back in stock?

Regards

Scott
Top
angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:
Contact angusgr

Re: Power supplies

Post by angusgr » Tue Sep 01, 2015 1:33 am

Hi Scott,

They should be back in stock this week, will let you know.

Angus
Top
Angrytelstraman
Posts: 2
Joined: Fri Jul 22, 2016 1:58 pm

Re: Power supplies

Post by Angrytelstraman » Fri Jul 22, 2016 2:04 pm

What Potential issues can occur with the 802 non-isolated POE boards?

I just pulled a new ether10 from box powered OK on usb soldered in the what I now know is the non-isolated poe board powered up all ok and has been working for a couple of days then nothing.....

Was running Jons relay control script and the units dead......

Interesting thing is I plug it in to usb and it shorts out the USB hub.....
Ethernet plugs in poe converter led flashs on and blue then the poe switch kills the connection
Top
Post Reply

Return to “EtherTen”