Freetronic atmega328p

The Experimenters Kit includes an "Eleven" Arduino-compatible board, plus a range of parts and a guide to make it easy to get started with Arduino projects. [Product Page]
Post Reply
Posts: 1
Joined: Sat May 28, 2016 10:31 am

Freetronic atmega328p

Post by T6000 » Sat May 28, 2016 10:34 am

I bought a freetronic atmega 328 and i cannot upload to it through a cp2102, i also attempted to burn a boot loader with a leostick, with no success, bought a 2nd chip with same results!

Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia

Re: Freetronic atmega328p

Post by angusgr » Mon Jun 20, 2016 7:43 am

Hi T6000,

It sounds like it might be something with your setup if two chips in a row don't work. Can you please post a photo of your flashing setup? Also if you go to Preferences in Arduino and turn on "Verbose" for Uploading, can you please copy-paste the output you get when running "Burn Bootloader"?

Thank you,


Posts: 4
Joined: Sat Jul 06, 2013 3:52 am

Re: Freetronic atmega328p

Post by Johnvan » Sun Feb 18, 2018 3:51 am

I have the same problem, I have 2* ATMEGA328P chip with BOOTLOADER installed or that what the ad says, and both will not UPLoad any sketches.
Will I have to Upload the bootloader first even though it says the bootloader is preloaded.

Post Reply