Problems reading SD-Card

[cowcon]

Im glad having my new Etherdue. Thank's Guys for your great work!

here is my Problem:

I like to access a 2GB FAT16 SD Card for reading some data from a txt file. Using the SD examples, there is no response. Testing the same sketch with my Etherten and the same Card - everything is fine. Any Suggestions? Is there anything more to know about for example Pin declarations, etc?

[andrew]

Sorry to ask a silly question, but when you push the uSD card into the ED, does the socket show some resistance and then 'lock' the card in?

[cowcon]

Yes it does. Same as with Etherten.

[andrew]

Yes it does. Same as with Etherten.

Ok then. Next - if not already done so, please try IDE v1.5.6
http://arduino.cc/en/Main/Software#toc3

and run the cardinfo example. If that doesn't work please email support@freetronics.com.

[cowcon]

I'm using 1.5.6 r2 from Arduino Webpage. Try to reinstall now..

[andrew]

I'm using 1.5.6 r2 from Arduino Webpage. Try to reinstall now..

OK then, most likely a faulty socket. Please email support@freetronics.com to organise a replacement board.