Upside down display

The StepDuino is an Arduino Uno compatible board with 2 onboard stepper controllers, a 20x4 LCD, servo outputs, and inputs for travel limit switches or a touchscreen overlay. [Product page]
Post Reply
lugton
Posts: 3
Joined: Wed Nov 25, 2015 6:45 am

Upside down display

Post by lugton » Wed Nov 25, 2015 6:49 am

Is there a way to make the display read the other way around, i.e., upside down?
Top
andrew
Freetronics Staff
Freetronics Staff
Posts: 978
Joined: Sun Jul 14, 2013 7:06 am
Location: Melbourne, Australia
Contact:
Contact andrew

Re: Upside down display

Post by andrew » Wed Nov 25, 2015 11:18 am

Not really, the display has a set method of drawing characters in hardware.
You could carefully remove the display, solder jumper wires from the main board to the LCD and mount it rotated at 180 degrees.
Top
lugton
Posts: 3
Joined: Wed Nov 25, 2015 6:45 am

Re: Upside down display

Post by lugton » Fri Dec 04, 2015 8:15 am

Thanks very much - that was my suspicion. I have redesigned the prototype to suit.
Top
Post Reply

Return to “StepDuino”