Page 1 of 1

Current limiting on the StepDuino

Posted: Mon Jul 27, 2015 3:21 pm
by DanR
Does the StepDuino have settings to limit the current so different sized motors can be used? Most motors are not so fussy about the voltage, but they do not like the maximum current rating to be exceeded.

Re: Current limiting on the StepDuino

Posted: Wed Jul 29, 2015 11:04 pm
by andrew
Yes, you can set the limits using the trimpots next to the outputs:
http://www.freetronics.com.au/pages/ste ... tart-guide