Controlling stepper motors on StepDuino

The StepDuino is an Arduino Uno compatible board with 2 onboard stepper controllers, a 20x4 LCD, servo outputs, and inputs for travel limit switches or a touchscreen overlay. [Product page]
Ray_M
Posts: 7
Joined: Sat Aug 15, 2015 6:34 am

Controlling stepper motors on StepDuino

Postby Ray_M » Sat Aug 15, 2015 6:49 am

Hi Crew,

I'm new here and just got StepDuino and I had no experience with the Arduino system until yesterday.

I have attached 2 "Mercury Motor" stepper motors to the board, and want to control the forward and backward motion of both of them via a tiny Visual Basic program I can write. I can do that with only one motor so far, but not two - and if I connect both motors the one that worked just starts shuddering.

Can anyone point me in a good direction?

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: Controlling stepper motors on StepDuino

Postby angusgr » Tue Aug 18, 2015 12:11 am

Hi Ray,

Are you able to post a photo or a diagram of how the steppers are wired up?

Angus

Ray_M
Posts: 7
Joined: Sat Aug 15, 2015 6:34 am

Re: Controlling stepper motors on StepDuino

Postby Ray_M » Tue Aug 18, 2015 4:31 am

Thanks for your interest. This is such a great product.
I will prepare a photo or diagram if needed, but for now:

[EDIT]: Problem partially solved - back later.

vexmatech
Posts: 7
Joined: Fri Mar 03, 2017 7:19 am
Contact:

Re: Controlling stepper motors on StepDuino

Postby vexmatech » Fri Mar 03, 2017 7:23 am

thanks for this valuable information.

vexmatech
Posts: 7
Joined: Fri Mar 03, 2017 7:19 am
Contact:

Re: Controlling stepper motors on StepDuino

Postby vexmatech » Fri Mar 03, 2017 8:29 am

thanks for this information.


Return to “StepDuino”

Who is online

Users browsing this forum: No registered users and 1 guest