RPi3
Re: RPi3
RPi3 dist-upgrade has a few extra gpio tricks...
https://www.raspberrypi.org/blog/anothe ... -raspbian/
I installed the updates but I have retrived my pilevens from the dark pit of hell and shame where they rest.
I git my crappy hack code for you once I find it.
https://www.raspberrypi.org/blog/anothe ... -raspbian/
I installed the updates but I have retrived my pilevens from the dark pit of hell and shame where they rest.
I git my crappy hack code for you once I find it.
-
- Freetronics Staff
- Posts: 853
- Joined: Tue Apr 09, 2013 11:19 pm
- Location: Melbourne, Australia
- Contact:
Re: RPi3
Hi folks,
Sorry for the delay. The new Raspbian release helped me out as well. The pileven-installer.sh script is now updated for Raspberry Pi 3 on the latest Raspbian (should work with older Raspbian as well, but we recommend this month's release.)
See the full details on the Getting Started page:
http://www.freetronics.com.au/pages/pil ... rted-guide
Note that enabling PiLeven will disable the internal Bluetooth interface on Pi 3. You can use both together, with some caveats. See here for details:
http://www.freetronics.com.au/pages/pil ... #bluetooth
Sorry for the delay. The new Raspbian release helped me out as well. The pileven-installer.sh script is now updated for Raspberry Pi 3 on the latest Raspbian (should work with older Raspbian as well, but we recommend this month's release.)
See the full details on the Getting Started page:
http://www.freetronics.com.au/pages/pil ... rted-guide
Note that enabling PiLeven will disable the internal Bluetooth interface on Pi 3. You can use both together, with some caveats. See here for details:
http://www.freetronics.com.au/pages/pil ... #bluetooth
-
- Posts: 20
- Joined: Wed Jul 16, 2014 12:51 am
Re: RPi3
angusgr
great work thank! I am having some issues with disabling the auto-reset.
But have opened an issue at github! thanks again
great work thank! I am having some issues with disabling the auto-reset.
But have opened an issue at github! thanks again
Re: RPi3
Has anyone got these working together?
I tried 2 new RPi3's and 2 new PiLeven boards, neither worked.
When trying to load a sketch, all I get is...
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
... repeat 10 times...
Went over the install a few times, changed perms on the tty, nothing...
I tried 2 new RPi3's and 2 new PiLeven boards, neither worked.
When trying to load a sketch, all I get is...
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
... repeat 10 times...
Went over the install a few times, changed perms on the tty, nothing...
Re: RPi3
nah dude....
But here are a couple of links for you to waste more time. ENJOY!!
https://github.com/freetronics/PiLeven-tools
&
https://github.com/freetronics/PiLeven
But here are a couple of links for you to waste more time. ENJOY!!
https://github.com/freetronics/PiLeven-tools
&
https://github.com/freetronics/PiLeven
-
- Freetronics Staff
- Posts: 853
- Joined: Tue Apr 09, 2013 11:19 pm
- Location: Melbourne, Australia
- Contact:
Re: RPi3
Hi folks,
It looks like we may have had some bad boards slip through QA. If you're using the latest software and your PiLeven still doesn't respond, please email support@freetronics.com and let us know what you've tried.
We'll get everyone up and running (with new hardware if necessary) ASAP.
Angus
It looks like we may have had some bad boards slip through QA. If you're using the latest software and your PiLeven still doesn't respond, please email support@freetronics.com and let us know what you've tried.
We'll get everyone up and running (with new hardware if necessary) ASAP.
Angus