Freetronics eleven on EtherTen?

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
jebz
Posts:33
Joined:Sun Feb 12, 2012 10:58 pm
Freetronics eleven on EtherTen?

Post by jebz » Mon Jun 18, 2012 10:40 am

I have a different batch EtherTen board that I tried to update the boot flash on. It responds with a different USB device name " Freetronics Eleven " on com9 where the original is com5.

User avatar
jonoxer
Freetronics Staff
Freetronics Staff
Posts:298
Joined:Sat Oct 15, 2011 11:31 am
Location:Melbourne, Australia
Contact:

Re: Freetronics eleven on EtherTen?

Post by jonoxer » Tue Jun 19, 2012 9:23 pm

The EtherTen is functionally an Eleven and an Ethernet Shield squished onto the same PCB, so it uses the same bootloader as the Eleven (and the Uno).
--
Jon

jebz
Posts:33
Joined:Sun Feb 12, 2012 10:58 pm

Re: Freetronics eleven on EtherTen?

Post by jebz » Wed Jun 20, 2012 7:51 am

jonoxer wrote:so it uses the same bootloader as the Eleven (and the Uno).
Jon
But it wasn't recognised as the same and was presented as com9 instead of the established com4. I'm beginning to dislike USB com ports. :?:

Post Reply