Hi, I encountered a problem installing the arduino-tftpboot bootloader on an EtherTen. The problem is a change in avrdude introduced around version 6.2, that changes the way extended fuse bytes are reported. This is described at https://github.com/arduino/Arduino/issues/5175
This leads to errors when trying to upload the bootloader such as:
avrdude: verification error, first mismatch at byte 0x0000
0xfd != 0x05
The solution is to modify hardware/arduino-tftpboot/boards.txt, the line
After this, it appears to upload successfully.
The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
1 post • Page 1 of 1