On-line thermometers to COSM

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
ngp99
Posts: 49
Joined: Sat Jul 14, 2012 1:53 am
Location: Dee Why NSW

On-line thermometers to COSM

Post by ngp99 » Sat Oct 20, 2012 11:56 pm

Has anybody done this?

I have the Etherten working consistently on my LAN with the Freetronics two-thermometer sketch. I also have the COSM example connecting me to the internet and it is accessible by anybody.
It is here. https://cosm.pachube.com/feeds/78283 This is just a dummy but it proves the connection is OK.

What I am now trying to do is get the relevant components of the Freetronics on-line thermometer sketch over to the COSM sketch. I only need the data. I think this is essentially a matter of copying the one-wire subroutines and I assume leaving the webserver stuff out, but the process connection loop is very short and probably hides a lot of mystery.

ngp99
Posts: 49
Joined: Sat Jul 14, 2012 1:53 am
Location: Dee Why NSW

Re: On-line thermometers to COSM

Post by ngp99 » Sun Oct 21, 2012 12:33 am

Thanks! I will check this out.

Post Reply