EtherTen - Installing Device Driver

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
txniteowl
Posts: 5
Joined: Thu Jul 26, 2012 8:02 pm

EtherTen - Installing Device Driver

Post by txniteowl » Sun Aug 05, 2012 10:31 pm

I am trying to install a device driver for USB Com Port to allow my Windows 7 Laptop PC to communicate with the EtherTen pcb. It shows COM10, but it will allow uploading to the pcb via the Arduino v1.01 development application. Windows 7 says it does not like the driver "Arduino Uno" driver because it is not 64-Bit driver.

Can someone help that has experienced this and fixed it?

Comments welcome.

Txniteowl
Developing Custom Code and App for the EtherTen board and others.
Thanks for Helping!
8-) 8-) 8-)
Attachments
Uno_DeviceIssue.gif
This is my device manager showing a CODE 10 error.

txniteowl
Posts: 5
Joined: Thu Jul 26, 2012 8:02 pm

Re: EtherTen - Installing Device Driver

Post by txniteowl » Fri Aug 10, 2012 2:36 pm

Got it. Thanks for the help.

Dennis

Post Reply