EtherTen to ThingSpeak

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
Aravind
Posts: 1
Joined: Fri Apr 26, 2019 3:12 am

EtherTen to ThingSpeak

Post by Aravind » Mon Oct 21, 2019 9:13 am

Dear Freetronicians Greetings,
I have an arduino EtherTen board, and I have to send sensor data from board to the thing-speak cloud. The router has assigned a suitable IP address for the board, and I have tested the sensor data by trying to configure the board as a web server. With the IP address in the URL, data is sent to the web. Later I configured the board as an ethernet client, and wanted to send it to a thingspeak server. Offline data is working in the arduino serial monitar, while I get a message saying 'Connection to Thingspeak failed'. I tried many options, but still the result remains same. Kindly advise for this issue.


Thanks

Aravind

Post Reply