Motor only spins in one direction

Drive a 4-wire bipolar stepper motor or a pair of DC motors from your Arduino. [Product page]
Post Reply
AidanBlair
Posts: 1
Joined: Fri Sep 30, 2016 5:02 am

Motor only spins in one direction

Post by AidanBlair » Fri Sep 30, 2016 5:07 am

I recently have started playing with my motor shield and have come across a problem that I don't know how to solve. Using the example code for a DC motor shown on the quickstart page, I can get the motor to spin in one direction but not the other. I reverse which wire goes into which terminal and the motor only span in the opposite direction, so I don't think the problem is with the motor itself, more likely the program or the board itself. If it helps I am powering a 12v motor through a 9v battery. If anyone knows what I'm doing wrong or how to fix it that would be greatly appreciated!

danieldewaard
Freetronics Staff
Freetronics Staff
Posts: 33
Joined: Thu Jul 14, 2016 2:41 am

Re: Motor only spins in one direction

Post by danieldewaard » Mon Nov 07, 2016 12:31 pm

Hi AidanBlair,

Sorry about the slow reply. Did you manage to fix the problem? If not post a picture of your current set up and I will see if I can spot any issues.

Daniel

Post Reply