Page 1 of 1

Use FTOLED with 128x96

Posted: Sat Feb 10, 2018 1:34 am
by EmanEric
Hi everyone! I am going to be using a SSD1351 128x96 display on a custom PCB for a project I am working on. I have found that the FTOLED library updates the display a bit quicker than the Adafruit library, so I would like to use it with the 128x96 version of the display. I have been experimenting with a dev board for both the different display versions to test them out. The library works great on the 128x128, but I haven't had any luck on getting it working with the 128x96. I have tried changing the number of columns or rows in the FTOLED.h file, but it doesn't seem to have an effect. The display will light up and work, but the top of the display is cut off when using the 128x96. Is it possible to get this working, if not I will have to swap to using the larger 128x128, but I thought I would ask here first. Many thanks