So how do you connect this to the internet?

The "Cube4" is a 4x4x4 RGB LED cube with an Arduino Leonardo compatible onboard controller. [Product page]
Post Reply
liminal
Posts:1
Joined:Thu Feb 09, 2017 5:15 am
So how do you connect this to the internet?

Post by liminal » Thu Feb 09, 2017 6:33 am

Hi guys,

Been playing with using a pi as an Alexa, works pretty well, would be cool to give this voice commands. How do you connect it to the network?

LeoCasta
Posts:1
Joined:Wed Oct 30, 2019 8:51 am

Re: So how do you connect this to the internet?

Post by LeoCasta » Fri May 08, 2020 6:53 pm

Using VPN, but sometimes some problem can be met.

AlexMoore
Posts:1
Joined:Wed Oct 30, 2019 9:33 am

Re: So how do you connect this to the internet?

Post by AlexMoore » Fri May 08, 2020 6:55 pm

LeoCasta wrote:
Fri May 08, 2020 6:53 pm
Using VPN, but sometimes some problem can be met.
There are some reasons of its appearing. Frankly speaking, you can google for it, but this could be your Internet provider's issue. This is what I was told from a friend of mine that works as an Internet specialist in a well known VPN service. To be honest, this friend of mine told me that It will be much better to change my provider to a new one, or for a high speed broadband. More than that, he told me that I can use usave.co.uk service for that, as this is the best service in that field and I can easily find a perfect Internet provider for myself with all the necessary features for me. Also, this is a well known service with a lot of positive feedback, so you won't be scammed

hiedic
Posts:1
Joined:Fri May 29, 2020 12:36 pm

Re: So how do you connect this to the internet?

Post by hiedic » Fri Jun 05, 2020 1:49 pm

Those problems with internet were the cause of my headaches. Couldn't connect due to the unstable connection and slow speed. I decided to buy a signal booster from myamplifiers. Now everything is ok! The main problem for me was slow and unstable internet.

Post Reply