Kit Servo issue?

The Experimenters Kit includes an "Eleven" Arduino-compatible board, plus a range of parts and a guide to make it easy to get started with Arduino projects. [Product Page]
Post Reply
Joined:Sat Sep 20, 2014 11:10 am
Kit Servo issue?

Post by DaveMark » Sun Oct 18, 2015 8:56 am


Been meaning to ask this for a while, been busy, and found a work around.

The servo in my kit doesn't like pos 0, it causes a stutter, so I use pos 1 instead.

Is this normal?

Thanks kindly.

Freetronics Staff
Freetronics Staff
Joined:Tue Apr 09, 2013 11:19 pm
Location:Melbourne, Australia

Re: Kit Servo issue?

Post by angusgr » Mon Oct 19, 2015 4:02 am

Hi Dave,

That's fairly normal, there's some variation in these kind of hobby servos. In RC control circles they call this "trimming" the servos.

The solution you have will work, or if you still want to use position 0 then you can vary the default 'min' and 'max' servo pulses when you call attach:

The default 'min' is 544 so you could try something like:

Code: Select all

servo.attach(servopin, 580, 2400);
and see if position 0 works correctly then. You may have to play around with the value to find the ideal min/max for a full range of movement, without jittering.


Post Reply