Disconnect Eleven from Computer USB port

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
mars17
Posts:2
Joined:Sun Aug 06, 2017 5:10 am
Disconnect Eleven from Computer USB port

Post by mars17 » Sun Aug 06, 2017 5:19 am

We are first time users. We have connected and run our first program. All worked fine. Now want to disconnect and pack up.
Is there a correct method for disconnecting the USB cable from the Eleven board and from Computer?
Top
SteveMac
Posts:2
Joined:Thu Aug 10, 2017 6:26 am

Re: Disconnect Eleven from Computer USB port

Post by SteveMac » Fri Aug 11, 2017 1:12 am

You can just unplug it.
As long as you are not uploading a program at the time nothing will be damaged on the Eleven.
Top
mars17
Posts:2
Joined:Sun Aug 06, 2017 5:10 am

Re: Disconnect Eleven from Computer USB port

Post by mars17 » Fri Aug 11, 2017 6:43 am

Thanks for the reply. Nice to know we are not breaking anything. We will have a crack at the next project. Cheers mars17.
Top
Post Reply

Return to “Eleven”