Experiment 3 (digial input)

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
Salispahic
Posts: 3
Joined: Sun Apr 24, 2016 1:35 am

Experiment 3 (digial input)

Post by Salispahic » Tue May 03, 2016 11:21 pm

Hi everyone,

I got the kit for my daughter several weeks ago, and we have been playing with it. We got to the experiment 3, first one with input. We followed the schematics, set it up twice, but it is not doing anything. Button press does not do anything and the leds are always on. What could be the problem?

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: Experiment 3 (digial input)

Post by angusgr » Mon May 09, 2016 4:21 am

Hi Salispahic,

Are you able to post a photo of your setup, please? Also, have you checked the code in the Arduino IDE that you've uploaded to the Eleven board?

Thanks,

Angus

Salispahic
Posts: 3
Joined: Sun Apr 24, 2016 1:35 am

Re: Experiment 3 (digial input)

Post by Salispahic » Fri May 20, 2016 1:39 am

Thank you angusgr for your reply

I will this weekend do it again with capturing each step and post it here. Sorry for not getting back to you earlier.

Cheers

Salispahic
Posts: 3
Joined: Sun Apr 24, 2016 1:35 am

Re: Experiment 3 (digial input)

Post by Salispahic » Sat Jun 04, 2016 1:02 am

Just to infor you the experiment is working. I think it was my bad :) Cheers.

waterboom123
Posts: 4
Joined: Wed May 11, 2016 10:05 am

Re: Experiment 3 (digial input)

Post by waterboom123 » Wed Aug 31, 2016 3:22 am

Thanks for the info
premium member

Post Reply