Sketch Upload

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
ShadowGaming
Posts:12
Joined:Sat Feb 08, 2014 7:06 am
Sketch Upload

Post by ShadowGaming » Sat Feb 08, 2014 7:14 am

When I Try To Upload the Blink Sketch (Arduino Software) I Get A Error In The Console;

Binary sketch size: 1,084 bytes (of a 32,256 byte maximum)
processing.app.SerialNotFoundException: Serial port 'COM1' not found. Did you select the right one from the Tools > Serial Port menu?
at processing.app.Serial.<init>(Serial.java:191)
at processing.app.Serial.<init>(Serial.java:77)
at processing.app.debug.Uploader.flushSerialBuffer(Uploader.java:77)
at processing.app.debug.AvrdudeUploader.uploadViaBootloader(AvrdudeUploader.java:175)
at processing.app.debug.AvrdudeUploader.uploadUsingPreferences(AvrdudeUploader.java:67)
at processing.app.Sketch.upload(Sketch.java:1671)
at processing.app.Sketch.exportApplet(Sketch.java:1627)
at processing.app.Sketch.exportApplet(Sketch.java:1599)
at processing.app.Editor$DefaultExportHandler.run(Editor.java:2380)
at java.lang.Thread.run(Thread.java:619)



Please Help I Got My Arduino Today so am Very Ameteur

andrew
Freetronics Staff
Freetronics Staff
Posts:978
Joined:Sun Jul 14, 2013 7:06 am

Re: Sketch Upload

Post by andrew » Sat Feb 08, 2014 11:00 pm

Hello
Remove the IDE you installed, and reinstall version v1.0.5, downloadable from here:
http://arduino.googlecode.com/files/ard ... indows.exe

Next, install the Freetronics Windows driver as per the instructions here:
http://www.freetronics.com/pages/instal ... or-windows

Finally, load the IDE and check you have the board type set to Arduino Uno and select a COM port that matches the board (See device manager if unsure), then upload the sketch.

ShadowGaming
Posts:12
Joined:Sat Feb 08, 2014 7:06 am

Re: Sketch Upload

Post by ShadowGaming » Sat Mar 14, 2015 3:29 am

Late reply...

XD thanks!

Post Reply