Unable to see port - Mac Mojave

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
Joined:Sat Oct 12, 2019 6:45 am
Unable to see port - Mac Mojave

Post by Bobbon » Sat Oct 12, 2019 7:23 am

Can't see my Freetronics Uno in the port within the tools section of Arduino software. It won't appear. I'm on a Macbook pro early 2015 running Mojave.
I understand there are drivers that could help but I'm concerned about downloading anything nefarious to the computer.
Does anyone know a driver that hasn't seemed to be a problem/gone through this process themselves?
I have already tried changing from usb 3 to usb 2 connection.
Obviously I'm a newbie at this.
Would appreciate help so I can kick on. Thanks.

Joined:Fri Sep 20, 2013 7:25 am

Re: Unable to see port - Mac Mojave

Post by Brissieboy » Sat Oct 12, 2019 9:16 am

Obviously you are going to need the appropriate driver - you won't get anywhere without that. You could start here.

Post Reply