Serial monitor no output: IDE 1.0.5 Enhanced

A shrunk down Leonardo-compatible board, thumb drive sized with native USB support. [Product info]
Post Reply
brownds
Posts: 2
Joined: Mon Sep 02, 2013 4:08 am

Serial monitor no output: IDE 1.0.5 Enhanced

Post by brownds » Mon Sep 02, 2013 4:18 am

Dear Group,

Using the 1.0.4 Arduino IDE, together with version 3.3 board profile, a LeoStick with version 2 boot loader, the serial monitor works fine.

However upgrading to version 1.0.5 (enhanced) and there is no serial monitor output.

Not really a show stopper because I can revert to IDE 1.0.4 but I would like to be developing with the latest tools where ever possible. Things like baud rate, correct choice of COM port, etc have been taken into account. The OS is Windows 8 Pro 64-bit if that matters.

Kind regards,
Denis

andrew
Freetronics Staff
Freetronics Staff
Posts: 978
Joined: Sun Jul 14, 2013 7:06 am
Location: Melbourne, Australia
Contact:

Re: Serial monitor no output: IDE 1.0.5 Enhanced

Post by andrew » Mon Sep 02, 2013 11:48 pm

At the moment please continue with the official IDE as it works for you.

brownds
Posts: 2
Joined: Mon Sep 02, 2013 4:08 am

Re: Serial monitor no output: IDE 1.0.5 Enhanced

Post by brownds » Tue Sep 03, 2013 6:14 am

Thanks, JohnB

Shall do :)

Kind regards,
Denis

Post Reply