Different multiplexing Layout (WHITE P10)

The Dot Matrix Display (DMD) is a 32x16 array of high-brightness LEDs for visually striking effects. [Product Page]
Post Reply
ojko
Posts: 2
Joined: Wed Aug 09, 2017 7:59 am

Different multiplexing Layout (WHITE P10)

Post by ojko » Wed Aug 09, 2017 11:03 am

We have a few different 32x16 P10 panels here and most work with the DMD and DMD2 library, but we got a new batch of white panels that work a little different. They using 8 16bit shift registers not the normal 16 8 bit shift registers and they have a couple of notable differences to the output:

1. All graphics are inverted, which i have seen a couple of forum users comment about.
2. Block 0,0 to 7,7 is swapped with block 8,8 to 15,15 and block 16,0 to 23,7 is swapped with 24,8 to 31,15. The other 4 8x8 segments appear in the correct location.

I was wondering if any one has seen these panels before (WHITE P10C4V2.2). What is the best why of transposing the 8x8 segments using the DMD2 Library.

Post Reply