Page 1 of 1

How to connect 16x32 LED display

Posted: Thu May 09, 2019 9:16 am
by UTNU7TUYTUY
MatrixCable.jpg
Hello sir
How to connect 16x32 LED display to card there are 8 pin and 8 pin total 16 pin

Re: How to connect 16x32 LED display

Posted: Sun Jul 14, 2019 10:52 am
by UNO_ONU
The diagram shows where the pins connect to the Arduino, e.g. OE to Digital pin 9, A to Digital pin 6, B to Digital pin 7, etc.
It just left out that pins 5, 7, 9, 13 and 15 are also GND the same as pin 3. Just join them all together.
Pins 6, 14 and 16 are not used or needed.

They are for a Mono Colour Panel only, if you want to use an RGB Panel, the wiring is completely different.