Search found 21 matches

by iSteve
Wed Jul 15, 2015 7:24 am
Forum: Eleven
Topic: ICSP then no USB
Replies: 5
Views: 2497

Re: ICSP then no USB

Ive got the same problem.

i can program with your USBASP but cant use the micro usb on the Eleven.

Any ideas??
by iSteve
Thu Oct 17, 2013 10:32 am
Forum: Project Showcase
Topic: 328P I/O Board
Replies: 2
Views: 1882

Re: 328P I/O Board

The Board is used in an automotive application. When it detects a turn on voltage on one of the Volatge dividers it executes a sequence,then can be controlled with the 2 OEM Switches which alter the timing length. and activate one or both the Mosfets in the sequence required giving a PWM Positive Ou...
by iSteve
Thu Oct 17, 2013 3:49 am
Forum: Project Showcase
Topic: 328P I/O Board
Replies: 2
Views: 1882

328P I/O Board

A recent project required a Freetronics 328P and several I/O's for a 12v Application The board contains 2 PWM Outputs with T-220 P Channel Mosfets 2 Resistor Dividers for input 1 Resistor Divider with 2 inputs Suitable for 2 Buttons etc 1 Transistor output 5V Regulator 100ma breakout connectors for ...
by iSteve
Sat Oct 05, 2013 12:02 pm
Forum: LeoStick
Topic: LeoStick does not work with USB3 ports
Replies: 5
Views: 2086

Re: LeoStick does not work with USB3 ports

I use a MacBook Air with USB 3 and have no problems
by iSteve
Fri Jun 07, 2013 10:06 pm
Forum: LeoStick
Topic: LeoStick and USB 3.0 not working
Replies: 2
Views: 1238

Re: LeoStick and USB 3.0 not working

I have the current MacBook Air and it works ok.
What port have you selected
by iSteve
Mon May 13, 2013 7:28 am
Forum: Module Support
Topic: AM3X issues
Replies: 2
Views: 1617

Re: AM3X issues

Replaced @ Jaycar

All good now
:)
by iSteve
Fri May 10, 2013 4:24 am
Forum: Module Support
Topic: AM3X issues
Replies: 2
Views: 1617

Re: AM3X issues

I have just hooked up the AM3X and uploaded the sketch in the guide.
i am getting X =995, Y=996, and Z=980

they float a little but certainly not in the 500 range

any Ideas?

C/O @ jaycar

:)
by iSteve
Thu May 09, 2013 1:52 am
Forum: LeoStick
Topic: Which ports can do PWM?
Replies: 13
Views: 6138

Re: Which ports can do PWM?

I can only get
3,5,9,10
to output PWM

using the Fade Sketch on the IDE and changing the pin.

any ideas?
by iSteve
Wed May 08, 2013 5:11 am
Forum: LeoStick
Topic: Which ports can do PWM?
Replies: 13
Views: 6138

Re: Which ports can do PWM?

I'm so confused.

The Leostick PWM pins are
by iSteve
Tue May 07, 2013 8:24 am
Forum: Project Showcase
Topic: Leostick LCD Shield
Replies: 4
Views: 4023

Re: Leostick LCD Shield

The boards are for a product but I have a few spares.