Freetronics Forum

Ive got the same problem.

i can program with your USBASP but cant use the micro usb on the Eleven.

Any ideas??

The Board is used in an automotive application. When it detects a turn on voltage on one of the Volatge dividers it executes a sequence,then can be controlled with the 2 OEM Switches which alter the timing length. and activate one or both the Mosfets in the sequence required giving a PWM Positive Ou...

A recent project required a Freetronics 328P and several I/O's for a 12v Application The board contains 2 PWM Outputs with T-220 P Channel Mosfets 2 Resistor Dividers for input 1 Resistor Divider with 2 inputs Suitable for 2 Buttons etc 1 Transistor output 5V Regulator 100ma breakout connectors for ...

I use a MacBook Air with USB 3 and have no problems

I have the current MacBook Air and it works ok.
What port have you selected

Replaced @ Jaycar

All good now

I have just hooked up the AM3X and uploaded the sketch in the guide.
i am getting X =995, Y=996, and Z=980

they float a little but certainly not in the 500 range

any Ideas?

C/O @ jaycar

I can only get
3,5,9,10
to output PWM

using the Fade Sketch on the IDE and changing the pin.

any ideas?

I'm so confused.

The Leostick PWM pins are

The boards are for a product but I have a few spares.