Search found 10 matches

by bigd003
Mon Sep 12, 2016 10:56 pm
Forum: EtherMega
Topic: New EtherMega R2, or R3?
Replies: 0
Views: 7686

New EtherMega R2, or R3?

As the title inquires, I am trying to find out for sure which revision the newer Megas are. I found a post here from a while back, that said the older megas do not use pins A4 and 5 for i2c... Which caused me to wonder if the newer ones do. I see they are printed with R3 on the back, but was wonderi...
by bigd003
Sun Sep 11, 2016 1:26 am
Forum: EtherMega
Topic: Ethermega stops
Replies: 7
Views: 6709

Re: Ethermega stops

Just a random thought, but what would happen if another device, like a mobile tried to access with an IP that matched .30, could that disrupt anything?
by bigd003
Sat Sep 10, 2016 1:28 pm
Forum: EtherTen
Topic: EtherTen and Relay 8 Shields
Replies: 8
Views: 6697

Re: EtherTen and Relay 8 Shields

Okay, yes, I did the code you've posted above. ( I actually use the same base code for my etherten / relay 8 shield project. ) This is sort of why I am interesting in what you are doing. So, I think I understand what you have done. You can control on/off via the web interface, but you also have 2 re...
by bigd003
Sat Sep 10, 2016 11:09 am
Forum: EtherTen
Topic: EtherTen and Relay 8 Shields
Replies: 8
Views: 6697

Re: EtherTen and Relay 8 Shields

Well the answer was staring me right in the face and I missed it...obviously looking too deep. Changed the code to this and it works like a charm, both from web interface and push buttons. if (digitalRead(2) == HIGH) { toggleLatchChannel(1); delay(1000); } else if (digitalRead(3) == HIGH) { toggleL...
by bigd003
Mon Sep 05, 2016 2:51 am
Forum: EtherTen
Topic: EtherTen controlling relays in strange manner.
Replies: 0
Views: 5170

EtherTen controlling relays in strange manner.

Hello, I have been playing with the etherten and relay8 shield combo for a while, and noticed a very strange behavior when using a certain 12v relay module. 8-Relay-modules-RM-12V1R8P-for-PLC-OMRON-G2R-1-12v-10A.jpg http://www.aliexpress.com/store/product/8-Relay-modules-RM-24V1R8P/1148148_322228470...
by bigd003
Mon Sep 05, 2016 2:29 am
Forum: EtherTen
Topic: Relay 8 project, as Jon shows, with DHT22 added... trouble
Replies: 4
Views: 4591

Re: Relay 8 project, as Jon shows, with DHT22 added... trouble

Angus, Hello, thank you for the reply. I wasn't aware you had gotten back to me, so now I apologize for the delay. After some tinkering, I was able to get it to work, though it does not seem logical. My DHT reading now appear as I wanted on the webpage, but strangely the coding for this appears AFTE...
by bigd003
Sun Apr 17, 2016 5:56 pm
Forum: SuperHouseTV Home Automation
Topic: episode #12 Building a Home automation controller sketch
Replies: 2
Views: 7660

Re: episode #12 Building a Home automation controller sketch

I got this from superhouse.tv I think. It came from a link by Jon Oxer somewhere... /* * Retrieve the MAC address from a Microchip 24AA125E48 I2C ROM, and report it * to the serial console at 57600bps. The I2C address of the ROM is set to 0x50, * which assumes both the address pins are tied to 0V. *...
by bigd003
Sun Apr 17, 2016 3:59 pm
Forum: EtherTen
Topic: Relay 8 project, as Jon shows, with DHT22 added... trouble
Replies: 4
Views: 4591

Re: Relay 8 project, as Jon shows, with DHT22 added... trouble

I can't get the reading from the DHT22 to show up on the web page. It reads fine, on the serial monitor I see everything I am supposed to, but the reading will not show up above the buttons on the page.

I have tried to print them there, but it doesn't seem to work.

Can anyone help?
by bigd003
Sun Apr 17, 2016 1:31 pm
Forum: Shield Discussion
Topic: Question about sketch, addressing boards.
Replies: 0
Views: 8018

Question about sketch, addressing boards.

Hello, In this Superhouse.tv sketch for the relay 8 boards, Jon Oxer uses 2 relay 8 boards. The addresses are 0x20 and 0x21, but I am having difficulty understanding how the code works, as the 2nd board (0x21) is never really addressed... -> // Set addressing style Wire.beginTransmission(shieldAddre...
by bigd003
Thu Apr 14, 2016 2:45 am
Forum: EtherTen
Topic: Relay 8 project, as Jon shows, with DHT22 added... trouble
Replies: 4
Views: 4591

Relay 8 project, as Jon shows, with DHT22 added... trouble

Hello! First let me say it has been a pleasure working with FreeTronics hardware so far, top notch quality for sure. Background: I have followed Superhouse Jon Oxer video #12, on how to build a web based home relay controller using 2x "relay 8" shields and an EtherTen. I copied the project pretty cl...