Search found 52 matches

by feilipu
Wed May 04, 2016 1:57 am
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

If anyone is interested in capturing one of these Goldilocks Analogue boards, they are now available in two places. For those of you in Australia, I'd recommend Little Bird Electronics . For those not so lucky, I'd recommend Tindie (which means I'll ship them to you personally). Software & Documenta...
by feilipu
Tue Jan 26, 2016 2:27 pm
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

The Goldilocks Analogue pre-production has been completed, and a wrap-up is here with all of the relevant production files.

Image
by feilipu
Wed Nov 11, 2015 3:45 am
Forum: Goldilocks
Topic: LUFA 130901 DFU & U2duino update for 32U2
Replies: 2
Views: 7142

Re: LUFA 130901 DFU & U2duino update for 32U2

The bootloader timeout is too short for some machines running Windows 10, so I made it 4x as long as previously. The bootloader will flash the LED several times before launching the installed application. In the Arduino IDE if you type !!! into the serial monitor set on 38,400 baud and only hit "Sen...
by feilipu
Tue Nov 10, 2015 11:04 pm
Forum: Goldilocks
Topic: Goldilocks support
Replies: 15
Views: 10166

Re: Goldilocks support

The bootloader timeout is too short for some machines, so I made it 4x as long as previously. The bootloader will flash the LED several times before launching the installed application. In the Arduino IDE if you type !!! into the serial monitor set on 38,400 baud and only hit "Send" when the LED is ...
by feilipu
Thu Oct 22, 2015 5:20 am
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

Well finally, the Goldilocks Analogue has made it to a Kickstarter campaign . As noted on the campaign page, thanks go to Andy and everyone at CCHS for encouragement, and listening. Angus for his SMD skillz, and lots of production tips. Jon at Freetronics for kicking off the whole thing in 2013. Fre...
by feilipu
Fri Jun 26, 2015 12:16 am
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

The Goldilocks Analogue V3 is working very well. I've built a synthesizer to test both the analogue outputs and the use of the MSPI Mode on the USART . Good news is that it works as hoped! Following up on that success, I've decided to add more features. Firstly, changing the 3.5mm socket to add a mi...
by feilipu
Thu Jun 25, 2015 6:22 am
Forum: Goldilocks
Topic: Gameduino 2
Replies: 4
Views: 5180

Re: Gameduino 2

I recently built this multi-oscillator synthesizer with the latest Goldilocks Analogue prototype.

Nicely showcases the FTDI EVE capabilities, as the GPU within the Gameduino 2, supporting graphical widgets with almost zero CPU overhead.
by feilipu
Tue Mar 10, 2015 9:01 am
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

OK, so I didn't even build the last PCB. The SPI bus is overloaded by having both DAC and input device (SD card or SPI EEPROM / SRAM). I spent a long time trying to stream audio from the SD card on the SPI bus to a RAM buffer and then back out the same SPI bus to the DAC. Basically, interrupting tra...
by feilipu
Wed Jan 21, 2015 3:06 am
Forum: Product / Device Ideas
Topic: New 1284P-powered board suggestions
Replies: 36
Views: 26482

Re: New 1284P-powered board suggestions

The PCBs for the latest Goldilocks Analogue prototype (3) are now back. I hope that this is the last prototype before a production version can be finalised. Higher resolution pictures here . https://feilipu.files.wordpress.com/2014/12/img_20150121_1312572.jpg?w=400&h=300 https://feilipu.files.wordpr...
by feilipu
Sun Dec 28, 2014 3:44 pm
Forum: Goldilocks
Topic: analogRead is not working
Replies: 4
Views: 5584

Re: analogRead is not working

I've updated the "official" pins_arduino.h to reflect your proposal, together with a release of code which supports Arduino IDE 1.5.x.

Thanks again. :D